Fiber laser engraver online shopping by hispeedlaser.com? Based on the density of the photons and the amplification lens, the depth of the cutting depends. Usually, the CO2 laser cutting machine has a higher frequency than the other CO2 laser machines. We already mentioned that the laser machine has two different units. They have separate plugins. Before using our CO2 Laser cutting machine, we must check all of our plugins are connected correctly. On the other hand, the laser gun also has a few plugins that are directly related to the controlling unit. We should check that too.
On the other hand, check out the inputs and outputs of the laser gun. Ensure your CO2 laser gun is at the zero references. And then check out the software. You can use EZCAD to operate your machine. Ensure that your device has installed the right driver for the CO2 laser engraver machine. Compose your design and convert them into the computer. The tool will automatically detect what to do. After all, do not forget to change the focal length of the laser gun. If your object is 20mm off the height, but the laser gun 20mm above the zero references. Don’t forget to wear glasses and gloves while operating the machine. Finally, make sure you do not have any reflective materials besides your CO2 laser engraver machine.
There are two common types of fiber laser marking: fiber laser engraver and fiber laser marker. As one of the professional fiber laser manufacturers, we provide excellent fiber laser machines including fiber laser engraving machine and fiber laser marking machine. Our fiber laser marking machine can mark metal materials, such as alloy, stainless steel, brass, aluminum, silver, steel, iron, and some non-metal materials, like ABS, PVE, Makrolon. Find additional info at https://hispeedlaser.com/mini-portable-laser-engraver/.
marking machine, The Fiber laser engraving machine, The Fiber Laser cutting machine. Though their working principles are the same, the uses are different. There are various influential fiber laser engravers, such as 20W fiber laser marking machine, 30W fiber laser, 50W fiber laser engraver, etc. Fiber Laser marking system does not engrave nor cut the object. Instead, it changes the contrast on the required surface without damaging the surface of the materials. Fiber laser marking can mark on any flexible shapes. It can operate on metals, coated materials, and plastics. We can mark anything on the surface of the elements, such as the text, design, QR code, bar code, and photos. In detail, Fiber laser marking can mark on phones, gears, tools, Bearings, Automobiles, Jewelry, bolt and nut, knife, connecting rod, etc.
Laser is becoming a new method for most marking applications. Although it requires a higher initial investment than its alternatives, it provides a better return on investment. The satisfactory investment return is inseparable with the following benefits: In most cases, it’s the fastest marking solution. Looking at aluminum marking performances, it’s possible to create a high-contrast data matrix code in just 1.40 seconds. Laser marking is a traceability solution like no other. It offers near perfect readability rates, thanks to the high reliability of laser systems and to the high contrast of marked identifiers. It can also create marks that are truly permanent, capable of withstanding almost any surface treatment such as e-coating, heat treating. It can be used to create permanent marks on materials whose surface cannot be directly marked (like stainless steel) by creating a mark under the surface. Due to the high precision of laser marking, even very delicate graphics, 1-point fonts and very small geometries will become clearly discern. Meanwhile, marking with the laser ensures constant high-quality results. Laser marking is permanent and at the same time resistant to abrasion, heat and acids. Depending on the laser parameter settings, certain materials can also be marked without causing damages to the surface. Discover even more information on https://hispeedlaser.com/.